I am looking for the following parts to fit a 1974 Barracuda. Certain parts I don't have, others I do have but would be interested in upgrading. Please contact me with pricing on anything you have that is listed here or on other parts that are not listed here that you might have available. My e-mail address (without the dashes, I put them in to protect myself from spam) is cuda-440@19-27.org
Interior parts needed
=====================
-dash pad (excellent condition with no cracks only)
-glove box liner (excellent condition only)
-package shelf (excellent condition only)
-trunk mat (excellent condition only)
-any unusual interior parts in original white color (kick panels, moldings, etc.)
Exterior parts needed
=====================
-trunk chrome strip (any condition)
-side rear chrome accents next to taillights (no dents only)
-racing side view mirrors, remote drivers, chrome (good chrome, no pits only)
-weather stripping (new only)
-"by Plymouth" badge (original no pitting excellent condition only)
Body parts needed
=================
-front fender patch panels (new aftermarket fine)
-front fenders (OEM no rust only, any finish condition, reasonable only)
-front valence (new aftermarket fine)
-battery tray (new aftermarket fine)
-drivers side floor patch (new aftermarket fine)
-quarters (new aftermarket fine)
Mechanical parts needed
=======================
-stering pump (OEM new, new or rebuilt only)
-5 1/2 leaf rear springs (1970 'Cuda 440/Hemi type)
-upgraded sway bars (1970 'Cuda 440/Hemi type)
-torsion bars (1970 'Cuda 440/Hemi type)
-wiring harness (1973-4 'Cuda only)
-Spare rim/tire plus jack (original only)
-any fluid reservoirs (original only)
==================================================================================
Additionally, I have the following parts which I may be willing to sell or trade:
==================================================================================
-original rear window (1970-74 Barracuda)
-tail lights (1972-74 Barracuda)
-tail light trim rings (1972-74 Barracuda)
-trunk lid, some rust and tie-down pin holes in all four corners (1970-74 Barracuda)
-wheel well moldings, good condition with a few dings but need cleaning/polishing
-passenger window gear assembly (dead spot in gear but will hold window closed tightly)
-headlight bezel, 1969 Coronet/Superbee, small ding
-glove compartment door for 1970 a-body, excellent condition (may fit other years)
-left and right visors for 1970 a-body, excellent condition (may fit other years)
-intake manifold and 2 BBL carburetor for 1970 318, early production
-original 1970 Challenger RT rear seat, excellent condition
-original 1970 Dart Swinger rear seat, excellent condition
-2 original 15x7 cop rims, need refinish
-4 original 14x6 Chrysler rallye rims
-1969 Chrysler 4BBL single-snorkel air clener, from 1969 New Yorker 440
-1970 Dodge 2BBL single-snorkel air cleaner, from 1970 Dart Swinger 318
-1974 Dodge 2BBL single-snorkel air cleaner, from 1974 Dart Sport 318
-Holley 4BBL for 1969 Chrysler 440/350HP, needs rebuild
-set of 4 poverty caps, early '70s no cop holes, ok condition
-electric fan, cheap
-1969 Chrysler AM thumbwheel radio
-1976 Chrysler AM/FM 8-track radio
-Chrysler Cordoba rally gauges, 1975-1979, may fit Charger/Fury
===================================================================================
A list of some of the parts I have recently picked up from E-Bay and other sources:
===================================================================================
-front seats/hinge covers for 1974 Barracuda **PURCHASED FRAMES + HARDWARE 12/2002
-rear seat core for '73-'74 E-Body **PURCHASED 12/2002
-sail panels **PURCHASED POOR ONES 12/2002
-(4) 15x7 Chrysler rallye rims **PURCHASED (4) 15x6.5 12/2002
-"'Cuda 440+6" badges **PURCHASED NOS 1/2002
-trunk lid **PURCHASED MINT ORIGINAL 12/2002
-rear valence **PURCHASED MINT ORIGINAL 12/2002
-steering box **PURCHASED REBUILT 12/2002
-wiper motor 3-speed **PURCHASED ORIGINAL 11/2002
-trunk torsion bars from '73 E-Body **PURCHASED ORIGINAL 11/2002
To contact me, please write to the following address WITHOUT THE DASHES: cuda-440@19-27.org
This is done to protect my e-mail address from harvest by automatic e-mail scammers.
© 2002 Mike - All rights reserved
Attention: All material on this website is protected by copyright. Unauthorized use of any material or information from this website for any purpose other than personal viewing, including but not limited to images and written information, constitues an infringement of this copyright and is expressly forbidden without prior written permission of the webmaster.